OFFICIAL PINOUT DIAGRAM: BOSCH ME17.7.8.png (Platform / Bench)529,625 bytes
OFFICIAL PINOUT DIAGRAM: BOSCH ME17.8.8 TC1728.png (Platform / Bench)507,777 bytes
OFFICIAL PINOUT DIAGRAM: BOSCH ME17_Black TC1728.png (Platform / Bench)808,694 bytes
STEP-BY-STEP BENCH CONNECTION PROCEDURE (HOWTO PROTOCOL)BENCH / BOOT
- Step 1 (Terminal 30 & Terminal 15 Power): Apply regulated bench power
13.5V — 13.8Vto constant battery (T30), switched ignition (T15), and ground (GND) pins according to the harness color code above. - Step 2 (CAN Bus & GPT0 / GPT1 Signals): Connect
CAN-H&CAN-L, along with signal leadsGPT0 (S1)&GPT1 (S2)to enter bench service mode without opening the ECU housing. - Step 3 (Full PFLASH + DFLASH Backup Read): Before writing any calibration, read and archive a full backup of internal Program Flash (
PFLASH) and Data Flash / EEPROM (DFLASH).
VEHICLES EQUIPPED WITH ECU ME17.7.8 (5)VEHICLE COMPATIBILITY
| Make | Model & Engine | ECU & MCU | Action |
|---|---|---|---|
| McLaren | MP4(12C) (3800 T • ) | BOSCH ME17.7.8 (TC1797) |
Open Vehicle → |
| Mercedes-Benz | S(W222) (65 V12 AMG M 279.870 630) | BOSCH ME17.7.8 (TC1797) |
Open Vehicle → |
| Mercedes-Benz | AMGS65 Final Edition (5980 M279 639) | BOSCH ME17.7.8 (TC1797) |
Open Vehicle → |
| McLaren | All Brand Models (Direct ECU Label Lookup) (Read/Write DFLASH/PFLASH, CheckSum) | BOSCH ME17.7.8 (TC1797) |
Open Vehicle → |
| Mercedes-Benz | All Brand Models (Direct ECU Label Lookup) (Read/Write DFLASH/PFLASH, CheckSum) | BOSCH ME17.7.8 (TC1797) |
Open Vehicle → |