OFFICIAL PINOUT DIAGRAM: BOOT_BOSCH ME17.9.71.png (Boot)3,219,813 bytes
OFFICIAL PINOUT DIAGRAM: BOSCH ME17.9.71.png (Platform / Bench)490,069 bytes
STEP-BY-STEP BENCH CONNECTION PROCEDURE (HOWTO PROTOCOL)BENCH / BOOT
- Step 1 (Terminal 30 & Terminal 15 Power): Apply regulated bench power
13.5V — 13.8Vto constant battery (T30), switched ignition (T15), and ground (GND) pins according to the harness color code above. - Step 2 (CAN Bus & GPT0 / GPT1 Signals): Connect
CAN-H&CAN-L, along with signal leadsGPT0 (S1)&GPT1 (S2)to enter bench service mode without opening the ECU housing. - Step 3 (Full PFLASH + DFLASH Backup Read): Before writing any calibration, read and archive a full backup of internal Program Flash (
PFLASH) and Data Flash / EEPROM (DFLASH).
VEHICLES EQUIPPED WITH ECU ME17.9.71 (11)VEHICLE COMPATIBILITY
| Make | Model & Engine | ECU & MCU | Action |
|---|---|---|---|
| Royal Enfield | Continental GT (650 • 29) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Tata | Nexon (1.2 12v Turbo 6AT) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Tata | Nexon (1.2 12v Turbo 6MT) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Tata | Tiago (1.2 12v JTP Turbo 5AT) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Tata | Tiago (1.2 12v JTP Turbo 5MT) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Tata | Tiago (1.2 12v Turbo 5AT) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Tata | Tiago (1.2 12v Turbo 5MT) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| UAZ | Modifikatsiya ECU ME17.9.71 (2700 16v • 128) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| UAZ | Patriot (2700 16v ZMZ-40905.10 128) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| Royal Enfield | All Brand Models (Direct ECU Label Lookup) (Read/Write DFLASH/PFLASH/Ext FLASH, Read Password, CheckSum) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |
| UAZ | All Brand Models (Direct ECU Label Lookup) (Read/Write DFLASH/PFLASH, CheckSum) | BOSCH ME17.9.71 (TC1724) |
Open Vehicle → |