OEM PINOUT DIAGRAM: BOOT_BOSCH MED17.2.2.png (Boot)2,565,724 bytes
STEP-BY-STEP BENCH CONNECTION PROTOCOL (HOWTO)BENCH / BOOT
- Step 1 (Terminal 30 & Terminal 15 power): Apply stabilized
13.5V — 13.8Vto the permanent power (T30) and ignition (T15) pins, plus ground (GND), following the cable color coding above. - Step 2 (CAN bus & GPT0 / GPT1 generator lines): Connect the
CAN-HandCAN-L, plus the signal wiresGPT0 (S1)andGPT1 (S2)to enter service mode without opening the ECU case. - Step 3 (Full PFLASH + DFLASH backup read): Before any write operation, read and save a full backup of the internal flash (
PFLASH) and the EEPROM area (DFLASH).
VEHICLES FITTED WITH THE MED17.2.2 ECU (10)FITMENT
| Brand | Model & Engine | ECU & MCU | Open |
|---|---|---|---|
| Mini | One(R55) (1600 • 122) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R55) (1600 • 98) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R55) (1600 • 75) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R56) (1600 • 122) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R56) (1600 • 98) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R56) (1600 • 75) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R57) (1600 • 122) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R57) (1600 • 98) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | One(R57) (1600 • 75) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |
| Mini | All Models (Direct ECU Connection) (Read/Write DFLASH/PFLASH/Ext FLASH, Read Password, Read/Write ISN, Recover VIN, CheckSum) | BOSCH MED17.2.2 (TC1797) |
Open vehicle → |