OFFICIAL PINOUT DIAGRAM: BOOT_BOSCH MEVD17.2.2.png (Boot)3,610,064 bytes
OFFICIAL PINOUT DIAGRAM: BOSCH MEVD17.2.2.png (Platform / Bench)500,272 bytes
STEP-BY-STEP BENCH CONNECTION PROCEDURE (HOWTO PROTOCOL)BENCH / BOOT
- Step 1 (Terminal 30 & Terminal 15 Power): Apply regulated bench power
13.5V — 13.8Vto constant battery (T30), switched ignition (T15), and ground (GND) pins according to the harness color code above. - Step 2 (CAN Bus & GPT0 / GPT1 Signals): Connect
CAN-H&CAN-L, along with signal leadsGPT0 (S1)&GPT1 (S2)to enter bench service mode without opening the ECU housing. - Step 3 (Full PFLASH + DFLASH Backup Read): Before writing any calibration, read and archive a full backup of internal Program Flash (
PFLASH) and Data Flash / EEPROM (DFLASH).
VEHICLES EQUIPPED WITH ECU MEVD17.2.2 (9)VEHICLE COMPATIBILITY
| Make | Model & Engine | ECU & MCU | Action |
|---|---|---|---|
| Mini | Countryman(R60) (1600 ALL4 Cooper S N18B16A 163) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| Mini | Countryman(R60) (1600 ALL4 Cooper S N18B16A 184) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| Mini | Countryman(R60) (1600 ALL4 Cooper S N18B16A 200) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| Mini | Countryman(R60) (1600 Cooper S N18B16A 163) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| Mini | Countryman(R60) (1600 Cooper S N18B16A 184) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| Mini | Countryman(R60) (1600 Cooper S N18B16A 200) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| PGO | Speedster(II) (1600 • 184) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| Mini | All Brand Models (Direct ECU Label Lookup) (Read/Write DFLASH/PFLASH/Ext FLASH, Read Password, Read/Write ISN, Recover VIN, CheckSum) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |
| PGO | All Brand Models (Direct ECU Label Lookup) (Read/Write DFLASH/PFLASH/Ext FLASH, Read Password, CheckSum) | BOSCH MEVD17.2.2 (TC1797) |
Open Vehicle → |