OFFICIAL PINOUT DIAGRAM: BOSCH MG1CS032.png (Platform / Bench)467,318 bytes
STEP-BY-STEP BENCH CONNECTION PROCEDURE (HOWTO PROTOCOL)BENCH / BOOT
- Step 1 (Terminal 30 & Terminal 15 Power): Apply regulated bench power
13.5V — 13.8Vto constant battery (T30), switched ignition (T15), and ground (GND) pins according to the harness color code above. - Step 2 (CAN Bus & GPT0 / GPT1 Signals): Connect
CAN-H&CAN-L, along with signal leadsGPT0 (S1)&GPT1 (S2)to enter bench service mode without opening the ECU housing. - Step 3 (Full PFLASH + DFLASH Backup Read): Before writing any calibration, read and archive a full backup of internal Program Flash (
PFLASH) and Data Flash / EEPROM (DFLASH).
VEHICLES EQUIPPED WITH ECU MG1CS032 (8)VEHICLE COMPATIBILITY
| Make | Model & Engine | ECU & MCU | Action |
|---|---|---|---|
| DS | DS3(U) (1399 - 101) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| Opel | Corsa(F) (1200 EB2ADTD 100) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| Opel | Mokka (1200 EB2DT 110) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| Peugeot | 2008(II) (1199 - 101) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| Peugeot | 208(II) (1199 - 76) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| DS | All Brand Models (Direct ECU Label Lookup) (Read/Write EEPROM/FLASH, CheckSum) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| Opel | All Brand Models (Direct ECU Label Lookup) (Read/Write EEPROM/FLASH, CheckSum) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |
| Peugeot | All Brand Models (Direct ECU Label Lookup) (Read/Write EEPROM/FLASH, CheckSum) | BOSCH MG1CS032 (SPC58) |
Open Vehicle → |